CCTV IP Camera Tester for Analog and IP Camera (IPCT7000)

7" CCTV IP Camera Tester for Analog Camera and IP Camera (IPCT7000)
 
The new IP Camera tester is developed for the On-Site installation and maintenance of IP camera(ONVIF, RTSP, RTP),analog camera and network device, with Video display, PTZ control, DC12v output power, Audio test, Color bar generator, RS 485 Data searching and Cable testing, PING testing, IP address scan, Cable scan, Video snapshot, Digital multimeter, Optical power meter, Video record, Image magnification, Port flicker, This function can accurately measure BNC cable and network cable's break point and short-circuit location. The new tester designed with easy operation and portability makes it simple for a cctv technician or installer to install and maintain CCTV systems, improving work efficiency by reducing time in the field.
 

 
 
1 . Video signal testing
²  The new ip camera tester, built-in high definition 7"HD LCD-TFT 1024(RGB)x600
full-view display screen, easy and directly displays the camera image quality
²  Support PAL/NTSC
²  LCD screen brightness/Contrast/Color Saturation adjustable. Suitable for field construction and maintenance work
 
 
2. PTZ controller
Display the input video images. Pan/tilt the P/T unit and zoom in/ out the image. Setup the controlling parameters like protocol, communication port, baud rate, PTZ ID, pan/tilt speed; set and call preset position.
 
 
3. DC12V 800mA output power
Power the camera with DC12V (800mA) power output from the tester. It is helpful for demo and testing when the power supply is not available.
 
 
4. Audio testing
Test the audio input from pickup devices. Connect the tester and pickup device with the audio cable.
 
 
 
5. Video playback
Video image and record files are saved in the SD card. Storage file directory can be created according to the date 
 
6. IP address scan
In digital IP surveillance applications, if IP camera's IP address is not clear or forgotten; the device cannot be used .
IP address scan can quickly search the connected IP camera or other network device's IP address.
 

7. PING test
PING is the most conventional network debugging tools; It is used for testing if the connected IP camera or other network equipment's ethernet port is working normally and the IP address is correct.