65W/90W 802.3af/at 1000Mbps PoE Injector (Waterproof)

65W/90W 802.3af/at 1000Mbps PoE Injector (Waterproof)

1.Descriptions of the Gigabit Waterproof PoE Injector

2.Features of the Gigabit Waterproof PoE Injector:

• Single-port Midspan 

This PoE Injector, Power over Ethernet (PoE) single- port Midspan offers a cost effective, fully IEEE 802.3af/802.3at compliant solution for outdoor installations, guaranteeing 90 Watts of power and ensuring safe and reliable operation in outdoor environment of any standard PoE data terminal.

• Wide Temperature

This PoE Injector work well during the complex environment within temperature -40ºC-85ºC, Output 65W/90W, 1.25A/1.73A, can meet most high-power PD in the market.

• Lightning Surge Protection

Provide 8 lines power& signal 6KV (10/700us) lightning-protection for PD escape from lightning strikes. Shell casing, IP65 Waterproof jacket protection on the connector.

• Waterproof & Easy install

This PoE Injector with shell casing IP65 can installed outdoor for using. There are four mounting holes to be fixed to the wall by tied to shelf.

• Provide Power with AT detection chip

Using AT detection chip, the chip can adapt to the complex working environment requirements. Support PoE / PoE+ / LTPoE++ PD.

3.Technical specifications of the Gigabit Waterproof PoE Injector:

4.Product qualification and deliver, shipping and serving of the Gigabit Waterproof PoE Injector

5.FAQ

Q.  Why Use PoE Switch?

1. Functionally, PoE switch brings many advantages to an installation, including:

Flexibility: PoE switch supplies power via an Ethernet cable and eliminates the demand for additional electricalwiring. Therefore, equipment can be installed based on where it needs to go. The combination of PoE and wireless technology allows for a practically cable-free environment.

Reliability: PoE power comes from a central and generally compatible source rather than a collection ofdistributed wall adapters. It can be back-up by an uninterruptible power supply.

Cost-efficient: With PoE network switch, there is no need for users to purchase and install additional electrical wires and outlets, which create significant savings on installation and maintenance costs.

17. What is “N””V””S”?

1. Three working modes.

        N: Standard

        Working normally as other Poe Switch in the market.

        V: Port isolation

        All the POE ports will be isolated from each other(not included the uplink ports)

It means the the devices connected on the poe ports can't meet each other, but can connect the internet or other device through the uplink port.

        S: 250 meters model

Switch to “S” mode, downlink speed limit is 10M, to achieve Maximum 250 meters signal and POE power supply

17. What chip does the Chinasky POE Switch used?

1. Realtek chip.

17. What’s the working environment for the Chinasky PoE Switch?

1. Working Temperature:-20℃-65℃

       Working Humidity :10%-90% RH non-condensing

17. What’s the warranty for the Chinasky PoE Switch?

1. 2 years.

17. What’s the general delivery time for Chinasky PoE Switch?

1. Samples: 3~5 days

50~500pcs: 15 days

500pcs~2000pcs: 25 days