CCTV Video Power Data Balun with 4 Pair UTP Cable , Surge Protection, 12VDC Output

1. Channel: 16 CH

2. Attenuation: 0.5dB Typ

3. Frequency Response: DC to 8MHz

4. Video Format: NTSC, PAL , and SECAM

5. Connector Video: Female BNC, RJ45 and Terminal Block

6. CMRR: 60 dB

7. Power: Input:AC90-240V output:DC13V

8. Certification: CE,RoHS

CCTV Video Power Data Balun with 4 Pair UTP Cable , Surge Protection, 12VDC Output

Description:

The PVD 4 series is advanced device that combines video, PTZ data, and camera power over a single 4-pair UTP cable to simplify CCTV installations in a structured wiring environment. At the camera end the single channel PVD video balun combiner provides video, power and data on separate outputs. The PVD 4 series has built-in DC1 3V power supply. Each camera power output is equipped with a self-resetting fuse for extra protection.

PVD416M series is designed to be placed at a location between the cameras and control room to extend the video up to 1200m. The PVD416M series video signals are connected through RJ45 and Category-5 cables to passive or active UTP receivers at the control room. The data connections to the DVR are through RJ45 and Category-5 cables.

Features:

• Combines video, power and data into a single RJ45 4-pair cable
• Use with the power-video-data transceiver at the camera
• Power: Build-in AC90-240V to DC13V converter
• 16 isolated camera power, 1Amax per channel
• Built-in passive transceivers with surge protection
• 60 dB cross talk and noise immunity
• Designed for structured wiring applications
• Connectors: Video-BNC, UTP-RJ45, Power-"Press-Fit" terminal block

Technical specifications:

Wire Type:

The PVD system operates well with Cats or better UTP wire,24 AWG(0.5mm) or thicker.

Low voltage camera power video may be sent within same wire bundle.

Do not use shielded twisted-pair wire.

Do not use un-twisted wire.

Do not run 24V/28VAC within same wire bundle with telecom or other datacom signals

Power-Distance Chart:

Using PVD products, cameras can be powered at extended distances, please refer to the ctart below for more information.

All RJ45 Connector follows industry-standard TIA/EIA 568B pinouts:

Application Diagram: