1 Channel Passive CCTV Balun, Passive UTP Balun, Passive Video Balun, with Extension Cable VB202P
Description:
The video balun VB202P is a passive transmission device that transmits video signal over unshielded twisted
pair wires, point-to-point, for distances up to 1000 feet (330 m). It uses Category 5 UTP. It’s easy to
install and cost effective, and does not require power.
The extremely compact size allows the balun VB202P to fit anywhere that a BNC can fit. It is ideal for mounting
directly on virtually all high-density DVRs without any additional cabling. Its crosstalk and noise immunity
ensure quality video signals.
Features:
Full-motion CCTV video at distances up to 330m When used with any passive transceiver
Up to 1500m with any active UTP video receiver
Outstanding interference rejection, transient protection
High quality image
It can work as video transmitter or video receiver
Compact size and easy installation
With Pigtail BNC connector
Support NTSC, PAL, SECAM, CVI and AHD
Technical specifications:
Video Format |
NTSC, PAL, SECAM, CVI and AHD |
|
Frequency Response |
DC to 50MHz |
|
Attenuation |
0.5dB typ |
|
CMRR |
60 dB |
|
Impedance |
Coax, Male BNC |
75 ohms |
Terminal Block |
100 ohms |
|
Working environment |
Working Temperature |
-10℃ to +50℃ |
Storage Temperature |
-30℃ to +70℃ |
|
Humidity |
0 to 95% |
|
Wire Type |
UTP5 |
|
UTP Connection |
Screws terminal Block |
|
Power |
No power required |
|
Case |
ABS Plastic |
|
Dimension |
31mm*15mm*16mm with 14cm BNC connector |
|
Weight |
44g/pair |
keywords: passive balun, passive video balun, passive CCTV balun, passive UTP balun, passive CCTV video balun,
BNC Balun, Video Balun, balun, CCTV Video Balun, CCTV balun, CCTV UTP Video Balun,1ch passive video balun,
single channel video balun, Video Transmitter, Video Transceiver, Video receiver, UTP balun, UTP Transmitter, UTP
Transceiver, UTP receiver, UTP video balun, UTP video Transmitter, UTP video Transceiver, UTP video receiver, BNC
balun, RJ45 balun,